NSE7_SDW-6.4 Dumps with Free 365 Days Update Fast Exam Updates [Q37-Q54]

Share

NSE7_SDW-6.4 Dumps with Free 365 Days Update Fast Exam Updates

Verified NSE7_SDW-6.4 dumps Q&As - 2024 Latest NSE7_SDW-6.4 Download


Fortinet NSE7_SDW-6.4 Certification Exam is designed for network and security professionals who have experience with Fortinet SD-WAN solutions and are looking to enhance their skills and knowledge in this area. Fortinet NSE 7 - SD-WAN 6.4 certification is ideal for network engineers, security engineers, system administrators, and IT professionals who are responsible for managing SD-WAN solutions in their organizations.


Fortinet NSE 7 - SD-WAN 6.4 exam is intended for individuals who have experience in network security and who are looking to expand their knowledge and skills in the area of SD-WAN technology. NSE7_SDW-6.4 exam covers a wide range of topics, including SD-WAN deployment, configuration, and troubleshooting, as well as security features and best practices.

 

NEW QUESTION # 37
Refer to the exhibit.

Which conclusion about the packet debug flow output is correct?

  • A. The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
  • B. The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.
  • C. The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.
  • D. The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.

Answer: A


NEW QUESTION # 38
Which two benefits from using forward error correction (FEC) in IPsec VPNs are true? (Choose two.)

  • A. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links.
  • B. FEC transmits additional packets as redundant data to the remote device.
  • C. FEC reduces the stress on the remote device buffer to reconstruct packet loss.
  • D. FEC transmits the original payload in full to recover the error in transmission.

Answer: A,B


NEW QUESTION # 39
Refer to exhibits.


Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?

  • A. The reverse shaper option must be enabled and a traffic shaper must be selected
  • B. The guaranteed-10mbps option must be selected as the reverse shaper option.
  • C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
  • D. The guaranteed-10mbps option must be selected as the per-IP shaper option

Answer: B


NEW QUESTION # 40
Refer to the exhibits.
Exhibit A:

Exhibit B:

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate distributes traffic.
Based on the exhibits, what are two expected behaviors when FortiGate processes SD-WAN traffic? (Choose two.)

  • A. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
  • B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
  • C. The first Vimeo session may not match the Vimeo SD-WAN rule because the session is used for the application learning phase.
  • D. The Vimeo SD-WAN rule steers Vimeo application traffic among all SD-WAN member interfaces.

Answer: B,C


NEW QUESTION # 41
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )

  • A. It sends probe signals as health checks to the beacon servers on behalf of FortiGate
  • B. It improves SD-WAN performance on the managed FortiGate devices.
  • C. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices
  • D. It acts as a policy compliance entity to review all managed FortiGate devices
  • E. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server

Answer: C,E


NEW QUESTION # 42
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )

  • A. A peer ID is included in the first packet from the initiator, along with suggested security policies
  • B. XAuth is enabled as an additional level of authentication which requires a username and password
  • C. A total of six packets are exchanged between an initiator and a responder instead of three packets.
  • D. The use of Diffie Hellman keys is limited by the responderand needs initiator acceptance

Answer: B


NEW QUESTION # 43
Refer to exhibits.
Exhibit A.

Exhibit B.

Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?

  • A. Check interval is the time to wait before a packet sent by a member interface considered as lost.
  • B. The dead member interface stays unavailable until an administrator manually brings the interface back.
  • C. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
  • D. Port2 needs to wait 500 milliseconds to change the status from alive to dead.

Answer: C


NEW QUESTION # 44
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers. The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links. One link has random jitter and latency issues, and is based on a wireless connection.
Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD-WAN rules? (Choose two.)

  • A. Configure an SD-WAN rule to load balance all traffic without VoIP.
  • B. Choose the suitable interface based on the interface cost and weight.
  • C. Use the performance SLA targets to detect latency and jitter instantly.
  • D. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
  • E. Place the troublesome link at the top of the interface preference list.

Answer: C,D


NEW QUESTION # 45
Refer to the exhibit.

Based on the output, which two conclusions are true? (Choose two.)

  • A. Entry 1 (id=1) is a regular policy route.
  • B. The SD-WAN rules takes precedence over regular policy routes.
  • C. The all_rules rule represents the implicit SD-WAN rule.
  • D. There is more than one SD-WAN rule configured.

Answer: A,D


NEW QUESTION # 46
Which diagnostic command can you use to show the SD-WAN rules interface information and state?

  • A. diagnose sys virtual-wan-link neighbor.
  • B. diagnose sys virtual-wan-link member.
  • C. diagnose sys virtual-wan-link service
  • D. diagnose sys virtual-wan-link route-tag-list

Answer: B


NEW QUESTION # 47
Refer to exhibits.

Exhibit B.

Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic however inbound traffic is not being evaluated by the shaping policy Based on the exhibit, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic'?

  • A. The reverse shaper option must be enabled and a traffic shaper must be selected
  • B. The guaranteed-10mbps option must be selected as the reverse shaper option.
  • C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
  • D. The guaranteed-10mbps option must be selected as the per-IP shaper option

Answer: B


NEW QUESTION # 48
Refer to exhibits.


Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?

  • A. The reverse shaper option must be enabled and a traffic shaper must be selected
  • B. The guaranteed-10mbps option must be selected as the reverse shaper option.
  • C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
  • D. The guaranteed-10mbps option must be selected as the per-IP shaper option

Answer: B


NEW QUESTION # 49
Which statement about using BGP routes in SD-WAN is true?

  • A. VPN topologies must be form using only BGP dynamic routing with SD-WAN.
  • B. Adding static routes must be enabled on all ADVPN interfaces.
  • C. Dynamic routing protocols can be used only with non-encrypted traffic.
  • D. Learned routes can be used as dynamic destinations in SD-WAN rules.

Answer: D

Explanation:
Explanation/Reference:
https://www.fortinetguru.com/2019/09/using-bgp-tags-with-sd-wan-rules-fortios-6-2/#:~:text=SD%2DWAN%
20rules%20can%20use,to%20the%20customer's%20data%20center.


NEW QUESTION # 50
Refer to exhibits.


Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

  • A. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.
  • B. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
  • C. The initial session of an application goes through a learning phase in order to apply the correct rule.
  • D. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.

Answer: B,D


NEW QUESTION # 51
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )

  • A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
  • B. It improves SD-WAN performance on the managed FortiGate devices.
  • C. It acts as a policy compliance entity to review all managed FortiGate devices.
  • D. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
  • E. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.

Answer: C,D


NEW QUESTION # 52
Which diagnostic command can you use to show the SD-WAN rules interface information and state?

  • A. diagnose sys virtual-wan-link member.
  • B. diagnose sys virtual-wan-link neighbor.
  • C. diagnose sys virtual-wan-link service
  • D. diagnose sys virtual-wan-link route-tag-list

Answer: C


NEW QUESTION # 53
Refer to the exhibit.

Which two statements about the debug output are correct? (Choose two )

  • A. FortiGate provides statistics and readings based on historical traffic logs.
  • B. This traffic shaper drops traffic that exceeds the set limits.
  • C. Traffic being controlled by the traffic shaper is under 1 Kbps
  • D. The debug output shows per-lP shaper values and real-time readings.

Answer: A,D


NEW QUESTION # 54
......


Fortinet NSE7_SDW-6.4 certification is an essential asset to an enterprise in need of a skilled and experienced SD-WAN expert. By earning this certification, individuals gain recognition as experts in designing and maintaining secure, reliable, and high-performing SD-WAN solutions, which is a must-have for enterprises seeking to remain competitive in today's business landscape. Fortinet NSE 7 - SD-WAN 6.4 certification program also equips individuals with the knowledge and skills required to improve network operations, minimize downtime, and maximize network uptime.

 

Updated Fortinet Study Guide NSE7_SDW-6.4 Dumps Questions: https://examsdocs.lead2passed.com/Fortinet/NSE7_SDW-6.4-practice-exam-dumps.html